Creep Stress Analyses Affected by Load Properties on P91 Pipe with Local Wall Thinning under High Temperature
The local wall thinning defect is very normal on pipes in power plants, which may result in stress redistribution of the pipes during the service process at elevated temperature. For the purpose of understanding the stress redistribution and strain accumulation of pipes with local wall thinning affected by load properties under creep condition, three groups of models were calculated, using three-dimensional elastic-plastic finite element analyses (FEA) based on FEA codes ABAQUS. In this study, the pipes has an identical defect of local wall thinning, the load properties and values are changed. Three groups of load properties, considering here, were monotonic internal pressure, monotonic moment and both internal pressure and moment, respectively. The numerical simulation conducted on P91 full-scale steel pipes at 625 , with local wall thinning located at the inner surface. Then, ℃von Mises stress and creep strain of pipes after 100,000h could be obtained corresponding to different models. Based on the analysis, the figures of creep stress and strain varying with load properties were plotted. Then, the stress and strain of pipes with local wall thinning affected by load properties were discussed. The results indicate that creep stress and creep strain increase with load properties. The variation laws have been summarized. The research results can provide the possibility on safety assessment and structure integrity analysis of the pipe with local wall thinning at high temperature effectively.
XUE Jilin ZHOU Changyu PENG Jian
School of Mechanical and Power Engineering, Nanjing University of Technology,Nanjing 210009, China School of Mechanical and Power Engineering, Nanjing University of Technology, Nanjing 210009, China
国际会议
桂林
英文
1-6
2010-11-16（万方平台首次上网日期，不代表论文的发表时间）