Die Forging Process Simulation of a Connecting Rod

摘要：

Numerical simulation of connecting rod die forging processing was performed by finite element method (FEM) software Deform 3D. The changes of the temperature fields, stress fields of the billet and dies, and upper setting force-stroke curve during the die forging were obtained. The simulation results show that (1) the increase of the fillet radius of dies could effectively reduce the stress concentration so that to prevent the die crack arising at high level stress; (2) the optimum parameters of die forging process are 430 ℃ for forging temperature, 200 ℃ for preheat temperature of dies and 80mm/s for reduction rate by comparing both fields of the stress and temperature during different forging process.

作者: Lei XU Guangze DAI Xingming Huang Jing HAN Junwen ZHAO

作者单位: School of Materials Science & Engineering, Southwest Jiaotong University,Chengdu 610031, China

会议类型: 国际会议

会议名称: The 6th International Conference on Physical and Numerical Simulation of Materials Processing(第六届材料与热加工物理模拟及数值模拟国际学术会议 ICPNS 2010)

会议地点: 桂林

会议语种:英文

页码: 1-6

在线出版日期: 2010-11-16（万方平台首次上网日期，不代表论文的发表时间）