Numerical simulation for processing windows in TiAl alloys during the hot forging

摘要：

In this paper the FEM software Deform-3D was used to simulate the forging process of TiAl alloys. The simulation results show that naked forging of TiAl alloys is not easy to carry out due to the huge temperature loss. Although with the increment of the size of the billet, the temperature loss is decreased. Yet through naked forging a perfect billet without defects can not be obtained. Canned-forging can enlarge the processable region of TiAl alloys in the processing window. And with the increment of the billet size, canned forging can be carried out at a low strain rate without defects.

作者: Li Wang Yong Liu Wei Zhang Congzhang Qiu Hui Wang

作者单位: State Key Lab of Powder Metallurgy, Central South University, Changsha 410083, P.R.China

会议类型: 国际会议

会议名称: The 6th International Conference on Physical and Numerical Simulation of Materials Processing(第六届材料与热加工物理模拟及数值模拟国际学术会议 ICPNS 2010)

会议地点: 桂林

会议语种:英文

页码: 1-7

在线出版日期: 2010-11-16（万方平台首次上网日期，不代表论文的发表时间）