Study of Foil-pack Aluminized at 630C on Ni-Fe-Cr-Al Alloy Sheet Fabricated by EB-PVD
The microstructure of Ni-based alloy sheet prepared by Electron Beam Physical Vapour Deposition(EB-PVD) and Aluminizated were studied by X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and so on. The results show that the phase structures of the as-deposited Ni-base alloy sheet were Ni-based solid solution. The structure of as-deposited Ni-based alloy with microcrystal grain was compact, uniform and no precipitation. The phases of the alloy sheet were Al3Ni and Al3Ni2 when the aluminization was fulfilled at 630 at di ℃fferent times. The thickness of every layer was no more than 10μm. The coating was compact and a small amount of aluminum-rich region appeared in a small area. The interface between coating and substrate was clear and smooth, and macro-defect-free.
Li Mingwei Zeng Gang He Fei Zhao Yijie He Xiaodong
National Key Lab for Precision Heat Processing of Metal, Harbin Institute of Technology, Harbin 1500 School of Material Science and Engineering, Harbin Institute of Technology, Harbin, 150001 Center for Composite Materials, Harbin Institute of Technology, Harbin, 150001
国际会议
桂林
英文
1-8
2010-11-16（万方平台首次上网日期，不代表论文的发表时间）