Development of Swirl Meter for Sewage Pumping Station Model of the Harbour Area Treatment Scheme in Hong Kong (Stage 2A)
In the physical model study of Stonecutters Island main pumping station of the Hong Kong Harbour Area Treatment Scheme (HATS), a key design consideration is the avoidance of strong vortices and pre-swirl in the approach flow-which could impair the efficiency of pump operation. A swirl meter has been successfully developed to measure the swirl angle in the pump suction pipes. The performance of the swirl meter is tested in a swirling pipe flow with known angular momentum. LDA measurements of flow velocity are carried out to verify the swirling flow pattern. The rotational speed of the swirl meter is shown to be linearly proportional to discharge and depends on the inlet vane angle and associated velocity profile. The predictions of the rotational speed are in excellent agreement with data over a wide range of vane angles and discharges.
Jiuhao Guo Colin K.C.Wong Joseph H.W.Lee
Croucher Laboratory of Environmental Hydraulics, Department of Civil Engineering, The University of Hong Kong, Pok Fu Lam, Hong Kong
国际会议
南京
英文
68-74
2010-09-13（万方平台首次上网日期，不代表论文的发表时间）