Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (PFSS)
A study of the method of using green copperas (FeSO4.7H2O), sodium silicate (Na2SiO3), concentrated sulphuric acid (H2SO4) for inorganic polymer flocculant polyferric silicate sulfate (PFSS) is conducted. The effects of w(SiO2%) in Na2SiO3 solution, n(Fe)/n(Si), silicic acid activated time and pH value on the synthesis of PFSS are investigated. The method of preparing PFSS includes following steps: (i) preparation of polyferric sulfate (PFS); (Ⅱ) preparation of polymeric silicic acid; (iii) PFS mixture with polymeric silicic acid at a given condition. According to this study, with 0.3ml/L PFSS for treatment of raw water from the Yangtze River, removal rate of turbidity and permanganate index are up to 95% and 90% respectively. The optimum synthesizing parameters of PFSS are: w(SiO2%)=2.0%, n(Fe)/n(Si)=10:1, silicic acid activated time=10hours.
Zhang Wenyi Yao Lirong Ma Jianfeng Li Dinglong
Department of Environmental Engineering,Jiangsu Polytechnic University, Changzhou 213164,China Depar Department of Environmental Engineering,Jiangsu Polytechnic University, Changzhou 213164,China
国际会议
成都
英文
1-4
2010-06-18(万方平台首次上网日期,不代表论文的发表时间)