The adsorption characteristics of Bisphenol A onto activated sludge
Laboratory-scale batch experiments were conducted for investigating the adsorption of bisphenol A (BPA) at mg/L range onto activated sludge liquid. In batch adsorption experiments, all the adsorption isotherms obtained were found to fit the fifth species in five common types of adsorption isotherms at 25℃. The adsorption reached equilibrium quickly within 30mins, the maximum amount adsorbed was 1.29 mg (BPA)/g (mixed liquor suspended solid, MLSS) at pH 5 and decreased slightly at pH 5 to7.5. The average amount adsorbed onto the sludge liquid was 2.1 mg (BPA)/g (MLSS) that was more than onto the centrifugal sludge which was only 0.07mg/g.Amount adsorbed onto sludge liquid was declined with the increasing of MLSS and the maximum amount adsorbed was 6.9 mg (BPA)/g (MLSS) when the MLSS was 3702mg/L.
He-Yu qian Wang Jie Sun Bin Luo Nan
School of Environmental and Chemical Engineering Tianjin Polytechnic University Tianjin 300160, Chin School of Environmental and Chemical Engineering, Tianjin Polytechnic University; Key laboratory of School of Environmental and Chemical Engineering, Tianjin Polytechnic University
国际会议
成都
英文
1-4
2010-06-18（万方平台首次上网日期，不代表论文的发表时间）