The thermodynamic analysis of hot metal dephosphorization flux containing red mud
For the red mud is the main waste of aluminium works which pollutes the water environment. In order to utilization the red mud, the CaO-Fe3O4-Al2O3 flux for hot metal pretreatment is developed. The phase diagrams of the CaO-Fe3O4-Al2O3 system at 1350℃ and 1600℃ was calculated and analyzed with the FactSage software, and verified by the experimental results. In the phase diagram of the CaO-Fe3O4-Al2O3 flux at 1350 ℃, it is shown that when there is ferrous oxide in the flux and Al2O3 content less than 80%, the slag phase would be formed. After comparison of the phase diagram of the CaO-Fe3O4-Al2O3 flux at 1350 ℃ and 1600 ℃ , it is concluded that the CaO-Fe3O4-Al2O3 flux can be used to the hot metal pretreatment, and the composition of the flux should be carefuly decided.
Jin Yan Bi Xuegong
Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan Unive Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan Unive
国际会议
成都
英文
1-3
2010-06-18（万方平台首次上网日期，不代表论文的发表时间）