Study on pretreatment of P-tertt-butylphenol Formaldehyde Resin Synthesized Wastewater
In this paper, pretreating p-tertt-butylphenol formaldehyde resin synthesized wastewater has been carried out by the combined techniques of the ferric-carbon microelectrolysis (abbreviated as FCME) and the Fenton reaction. The result shows that when the COD of the wastewater is between 3350~8370mg/L, pH=2.0 and the reaction time of FCME is 120 minute, the removal of COD is above 48% though the FCME. The effluent of FCME was dosed 2.4ml/L H2O2(30%), and it had reacted 60 minutes at normal temperature(20~30℃) as Fenton reaction,the removal of COD exceeds 83% and B/C is increased from original under 0.05 to 0.35. Though this pretreatment, biotreated the p-tertt-butylphenol formaldehyde resin synthesized wastewater is possibility.
Yun Wu Hongwei Zhang
School of Environment and Chemical Engineering Tianjin Polytechnic University Tianjin, China
国际会议
成都
英文
1-4
2010-06-18(万方平台首次上网日期,不代表论文的发表时间)