Numerical simulation on forced swirl combustion chamber in diesel engine
A concept of forced swirl combustion chamber in diesel engine is proposed in this paper. It can be used to enhance the intensity of swirl flow in the cylinder and accelerate the rate of air-fuel mixture process by designing the special structure in the combustion chamber. This new type of forced swirl combustion chamber includes double swirl combustion chamber that was discussed past and partial swirl combustion chamber that is mentioned in this paper. Firstly, the calculative result of double swirl combustion chamber by CFD code FIRE is calibrated by the method of Validation & Verification with experiment data. By the effect of the special structure of the ridge and slope in partial swirl combustion chamber, the rate of air-fuel mixture and combustion process has been accelerated twice by comparing with the calculative result of these two combustion chambers. At the same time, the utilization of air in squish zone has been improved. The characteristic of double-peak has appeared within main combustion duration on the instantaneous heat release rate curve of partial swirl combustion chamber. The result of calculation shows that NOx and soot mass fraction of partial swirl combustion chamber is lower than that of double swirl combustion chamber by 8.2 and 7.4 percent respectively, and indicated heat efficiency is 2.2 percent higher.
diesel engine forced swirl combustion chamber simulation
SHANG Yong LIU Fu-shui LI Xiang-rong
Beijing Institute of Technology, Beijing, 100081, China
国际会议
2010 International Conference on Digital Manufacturing and Automation(2010 数字制造与自动化国际会议 ICDMA 2010)
长沙
英文
34-37
2010-12-18（万方平台首次上网日期，不代表论文的发表时间）