Energy-Saving Tunnel Illumination System Based on LEDs Intelligent Control
At present there is a lot of electric energy wastage in tunnel illumination, whose design is based on the maximum brightness outside and the maximum vehicle speed all year round. LEDs energy consumption is low, and the control of its brightness is simple and effective. It can be quickly adjusted between 0-100％ of its maximum brightness, and will not affect the service life. Therefore, using LED as tunnels illumination source, we can achieve a good energy saving effect. According to real-time data acquisition of vehicle speed, traffic flow and brightness outside the tunnel, the auto real-time control of tunnel illumination can be achieved. And the system regulated the LED luminance by means of combination of LED power module and intelligent control module. The tunnel information was detected by inspection equipments, which included luminometer, vehicle detector, and received by RTU(Remote Terminal Unit), then synchronously transmitted to PC. After data processing, RTU emitted the dimming signal to the LED driver to adjust the brightness of LED. Despite the relatively high cost of high-power LED lights, the enormous energy-saving effect and the well-behaved controllability is beyond compare to other lighting devices.
Shanshan Guo Hanting Gu Lan Wu Shuixiu Jiang
State Key Laboratory of Modern Optical Instrument, Department of Optical Engineering, Zhejiang Unive Zhejiang Jinji Electronics Co., Ltd, Hangzhou 310013, China Hangzhou Vocational and Technical College, Hangzhou 310018, China
国际会议
3rd International Photonics & OptoElectronics Meetings(第三届国际光子与光电子学会议 POEM 2010)
武汉
英文
1-6
2010-11-03（万方平台首次上网日期，不代表论文的发表时间）