Research on Physical and Mechanical Performance and Formaldehyde Adsorption Characteristics of Self-adsorption fiber board
The composite element method (CEM) is utilized to mix wood fiber and activated carbon into the self-adsorption fiber board under certain process condition.The density,bending strength,elastic modulus,internal bond strength and water absorption are tested under the same condition,at the same time,the formaldehyde emission rate is measured with desiccator method.The result shows that all the mechanical properties of self-adsorption fiber board are a bit higher than that of ordinary fiber board.The effect of formaldehyde self-absorption is highly related to the amount of added activated carbon instead of the form.Under the test condition,the emission of formaldehyde of the self-adsorption fiber board added with 10％ activated carbon grain can be reduced by 35％.Further more,it is easier for the self-adsorption fiber board added with powder activated carbon to obtain even physical and mechanical performance and absorption effect.
Self-adsorption Functional wood-based panels Activated carbon Mechanical properties
Jia Na Liu Cheng
Northeast Forestry University,Harbin,China,150040
国际会议
哈尔滨
英文
547-551
2010-07-24（万方平台首次上网日期，不代表论文的发表时间）