Investigation of soybean/PF resin based adhesive applying on plywood
For developing high bonding strength and environmental-friendly wood composites,a soybean/PF resin based (SP) adhesive was investigated and applied in the manufacture of plywood.Formula of the adhesive,the thermal behavior of the adhesive,and the optimum technical parameters of the plywood manufacture were investigated.The bonding strength and formaldehyde emission of plywood bonding by the adhesive were tested according to Chinese Standards methods.The result shows: the optimum formula of SP adhesive was: soy-based adhesive was 70％,PF resin was 30％;the optimum technical parameters of the plywood manufacture were: hot-pressing temperature was 160 ℃,hot-pressing time was 80 s/mm,pressure intensity was 1.2 MPa,and glue content was 160 g /m2;Properties of plywood made under the optimum technical parameters were: the bonding strength was 1.30 MPa,the formaldehyde emission was 0.32 mg/L.It completely meets the type I plywood requirement and level E0 of formaldehyde emission.
soy PF resin plywood bonding strength formaldehyde emission.
Gao Qiang Dang Ruili Sang Zitao Zhang Shifeng Li Jianzhang
College of Wood Sciences and Technology,Key Laboratory of The Ministry of Education of Wood Science and Engineering,Beijing Forestry University,Beijing 100083,P.R.China
国际会议
哈尔滨
英文
2007-2011
2010-07-24（万方平台首次上网日期，不代表论文的发表时间）