Design and implementation on the temperature control system of roaster based on FPGA and Fuzzy-PID technology
The temperature control system based on FPGA and Fuzzy-PID technology was used for the temperature control of the regeneration roaster of cold rolling Plant of Panzhihua Iron and Steel, compared with the single Fuzzy or PID control mode. The results show that Fuzzy control was used to adjust for a rapid response in a large error and PID control was used for adjustment of the details hi a small error and realized the adaptive tuning of the PID parameters and had a good dynamic and static control performance. It worked well with the minimum average temperature difference, and could inhibit the gas flow, air volume and the amount of waste acid, waste gas pressure and other factors on the stability of furnace temperature.
FPGA Fuzzy-PID controller roaster temperature control system
Li Huirong Zhang Xuefeng Pang Lijuan Tong Yanwei
The Information And Electrical Engineering College,University of Pan Zhihua ,Sichua,617000,China College of Material Engineering, University of Pan Zhihua, Sichua,617000,China College of Material Science and Engineering, Chongqing University, Chongqing, 400044,China
国际会议
深圳
英文
396-399
2011-03-28（万方平台首次上网日期，不代表论文的发表时间）