Modelling and Strength Analyse for Internal Tooth Ring of Two-class Three-ring Gear Reducer Based on ANSYS
The structures of two-class three-ring gear reducer were introduced. Finite element software ANSYS was used to analyze the stress of internal tooth ring plate ,stress cloudy drawings and deformation drawings were gotten. The results show that the deformation of internal tooth ring plate with 30mm thickness is small and it has enough stiffness under danger working circumstances. Maximum stresses are also satisfied with strength conditions and rich. If there is a decrease of 5mm thickness of internal tooth ring plate, there will not be a change of stiffness, strength conditions are still satisfied. These results show that the destruction factors of the internal tooth ring depends on the strength, the improved structural design is more reasonable than the original one. Recounted modeling and solved steps based on ANSYS can be used as a reference to engage in finite element analyse of analogous structures.
three-ring gear reducer internal tooth ring plate finite element analysis ANSYS strength
Hongjuan Dai Hongliang Zhou
School of Mechanical Engineering, Huaihai Institute of Technology Lianyungang China Tai Feed Co., Ltd
国际会议
The Third International Conference on Modelling and Simulation(第三届国际建模、计算、仿真、优化及其应用学术会议 ICMS 2010)
无锡
英文
413-416
2010-06-04（万方平台首次上网日期，不代表论文的发表时间）