Optimal Design of Rotary Ultrasonic Vibrator and Research on its Machining Experiments
In order to obtain well work performance, a new design process and the optimal method are systemically presented during ultrasonic vibrators design. Firstly, the general dimensions are calculated according to formula of ultrasonic theory. Secondly, 3D model without flange is established, and the best position setting a flange has been conformed through finite element analysis (FEM). Then constraints are laid on the flange, and the best model of vibration is obtained based on model analysis. The results are benefit to the following control design of ultrasonic vibrator. Finally, an ultrasonic vibration system has been made, and a series of experiments validate the feasibility of the design method.
Rotary ultrasonic vibrator Modal analysis Optimal design Experiment
Yongjun Tang Chunmu Chen Yongjun Zhang Guoyue Liu
Faculty of Electromechanical Engineering, Guangdong University of Technology, China
国际会议
广州
英文
349-354
2010-11-05（万方平台首次上网日期，不代表论文的发表时间）