Improvement of Noise Performance by Optimizing Machining Process Parameters on Ball Screw
Ball screw systems are largely used in industry for motion control and motor applications. But the problem of noise, which really perplexes us, is highly correlated with the quality in ball screw systems all the way In this paper, machining process parameters were evaluated in respects of technique, business, produce and quality to verify which impact influces the noise most. In order to adjust and compare, two comparison groups were set with the present parameters bench mark. Different ball screws were produced as specimens for the noise tests. Through comparing the noise performance of different parameters in the machining process respectively, a group of optimized machining process parameters were obtained. Another noise test was proceeded to know how noise performance was improved by optimizing the machining process parameters. At last, surface roughness tests have been done to know how surface roughness improved by optimization. The improvement of surface roughness is the main factor influences the noise performances.
ball screw machining process parameters noise, grinding dressing
ZHANG Qi XU Zhezhu CHOI Chonghun KIM Dongwook LU Long LYU Sungki
School of Mechanical & Aerospace Engineering, Gyeongsang National University, Jinju 660-701, Korea Tongil Industries Co., Ltd, Seoul 153-023, Korea College of Mechanical Engineering, Huaihai Institute of Technology, Lianyungang 222005, Jiangsu, Chi
国际会议
The 2010 International Symposium on Safety Science and Technology(2010 安全科学与技术国际会议)
杭州
英文
547-554
2010-10-26（万方平台首次上网日期，不代表论文的发表时间）