Structure Design, Numerical Simulation and Experimental Research of a New Type of Mine Dust Collector
In order to solve the problem of the low removal efficiency of mine dust collector for dust nowadays, especially for respirable dust, a new dry type of mine dust collector was designed in this paper with the characteristics of compactness, light weight, simple structure, moving easily and higher removal efficiency. The air volume of the designed mine dust collector is 4O12m3/h, the equipment volume is only 1.6m3 and the weight is only 400kg, lower than the bag filter and wet type dust collector in mine. The experimental results show that the removal efficiency to 99.9％ for respirable dust and the removal efficiency to 99.99％ for total dust can be obtained to collect pulverized coal (d50=2.139μm). At those conditions, the resistance of designed mine dust collector is lower than 700Pa. The numerical simulation results show that the rectangle structure of dust hopper instead of taper structure can benefit the total uniform flow distribution, helpfully to the application in mine. The flow field distribution of the designed dust collector is more uniform. The baffle location on the 660cm below the inlet mouth in vertical direction is more beneficial to uniform flow field distribution, not forming the secondary secondary blowing dust.
mine dust collector dust removal efficiency flow distribution
ZHANG Mingxing CHEN Haiyan YAN Cuiping LIN Longyuan
Key Laboratory of Solid Waste Treatment and Resource Recycle, Ministry of Education, Institute of Environment and Resource,Southwest University of Science and Technology, Mianyang 621010, Sichuan, China
国际会议
The 2010 International Symposium on Safety Science and Technology(2010 安全科学与技术国际会议)
杭州
英文
1481-1486
2010-10-26（万方平台首次上网日期，不代表论文的发表时间）