A Comparative Study on Wool Fiber Surface Modified by DCCA, Kroy-Resin and ECO
The properties of wool fibers treated with DCCA (Basolan 88), Kroy-resin and ECO were compared with frictional coefficients using an Y151 fiber coefficient of friction tester, surface modification observed by scanning electron microscopy (SEM) and chemical composition evaluated with FTIR. The changes in frictional and surface morphology of the single fibers are presented. Experimental results showed that some scales on the oxidized fiber surface were partially cleaved and some grooves generated. Coating resin on the chlorinated wool fibers results in a significant reduction in the fiber coefficient of friction, as the resin smoothes the protruding edges of the fiber scales. It also reduces the directional friction effect (DFE) of the fibers. FTIR results suggest no evident changes in the chemical composition of the fiber after the treatment.
wool fiber surface morphology DFE DCCA ECO
WAN Ailan HUA Xinzhong LU Weiguo XUE Yuan YU Weidong
Textile Materials and Technology Laboratory of Donghua University, Shanghai 201620, P.R.China Xin’ao Group, Tongxiang, Zhejiang, China College of garment & art design, Jiaxing University, Jiaxing, Zhejiang 314001, P.R.China College of garment & art design, Jiaxing University, Jiaxing, Zhejiang 314001, P.R.China Textile Mat
国际会议
The 12th International Wool Research Conference(第十二届国际羊毛会议12th IWRC)
上海
英文
93-96
2010-10-19（万方平台首次上网日期，不代表论文的发表时间）