Improving Wool/Polyester Yarn Quality by Transposal Spinning with Movable Balloon Control Ring
To improve yarn quality in ring spinning frame, this paper examines transposal spinning with the movable balloon control ring. The lefttransposal spinning and the right-transposal spinning were experimented to spin two yarns; after installing the movable balloon control ring, the two methods were respectively used to spin two other yarns again. All the experiments were on the same ring frame and the raw material was wool/polyester blend roving with a ratio of 30/70. The main quality indexes of the four yarns were tested and analyzed, including hairiness, tensile property, evenness and usual faults. The results show that the yarn spun by the lefttransposal spinning has a better quality than the righttransposal spinning, and after adding the movable balloon control ring, the improvement of yarn hairiness, strength and evenness, as well usual faults, is very obvious. So, in the advantage of transposal spinning, the method of installing the movable balloon control ring can improve some deteriorative problems and make yarn quality better. In addition, the method gives new insight into energy efficiency. The research in this field is on the way and the result is in accord with the Low-carbon Economy.
ring spinning wool/polyester roving transposal spinning the movable balloon control ring yarn quantity
ZHU Feifei ZHONG Zhili WANG Xungai
School of Textile, Tianjin Polytechnic University, Tianjin 300160, P.R.China School of Engineering and Technology, Deakin University, Geelong VIC 3217, Australia
国际会议
The 12th International Wool Research Conference(第十二届国际羊毛会议12th IWRC)
上海
英文
134-137
2010-10-19（万方平台首次上网日期，不代表论文的发表时间）