Realization of the Mathematic Model for Leno Color Effect
In order to achieve the CAD system for the leno color effect, this paper analyzed the forming principle of leno color effect firstly. It shows that the appearance of the color effect is affected by four factors, e.g. weave diagram, order of the colored warp, order of the colored weft and leno heddle draft. So during the modeling process, the leno color effect was divided into the following parts: weave diagram, order diagram of the colored warp, order diagram of the colored weft and leno heddle draft, and corresponding matrixes were set up. At the same time, Kronecker-product algorithm was used and a mathematical model for the ordinary weave color effect was proposed in this paper. On the basis of above works, transformational relationship between matrixes of weave, colored warp, colored weft and the matrix of the leno color effect was established. The simulated fabric diagram which was exported from the simulated system in which the leno color effect model is used is very similar with the appearance of the definite leno fabric. So the correctness of the model was verified.
Leno, Color Effect, Kronecker-Product Matrix
Tian Wei Zhang Rui Zhan Xin Zhu Chengyan
College of Materials and textiles, Key Laboratory of Advanced Textile Materials and Manufacturing Technology, Ministry of Education, Zhejiang Sci-Tech University(ZSTU),Hangzhou 310033, P.R.China
国际会议
上海
英文
612-616
2009-05-27（万方平台首次上网日期，不代表论文的发表时间）