Friction Measurements on Inclined Dry, Wet, and Glycerol-Contaminated Floors using Four Footwear Samples
Slips and falls are very common not only in industry but also in our daily activities. The coefficient of friction (COF) is coomonly adopted as a measure to quantify floor slipperiness and as an index to represent the risk of slipping and falling. A friction measurement study was conducted in the laboratory under four footwear, three surface, and three inclination conditions. The Brungraber Mark II slipmeter was used for the measurement. The results showed that all the main and interaction effects of the three factors were statistically significant. Dry floors had the highest COF, next with the wet floor, and finally the glycerol contaminated floors. The flat floor had the highest COF, next with the 5° floors, and finally the 10° ones. Treaded Neolite had better slip-resistance than flat Neolite. Treaded rubber, however, did not provided batter slip-resistance than that of the flat rubber sample.
slips & falls friction measurement footwear inclination Brungraber Mark II
Kai Way Li Jung-Chun Lu De Lin Tseng
Department of Industrial Management,Chung-Hua University,Hsin-Chu,Taiwan
国际会议
厦门
英文
1058-1061
2010-10-29（万方平台首次上网日期，不代表论文的发表时间）