Effects of organoclay on the mechanical properties of sbr compounds filled with carbon black and silica

摘要：

INTRODUCTION The silicate in the plate-like structure has an aspect ratio of over 100, along with a layer thickness of 1 nm and side length of 100～1000 nm1. When these layered silicates are distributed to each layer, they tend to have a large specific surface area. A high level of reinforcement can be obtained from a small amount of silicates because of these characteristics. Jia et. Al.2 reported very high reinforcing effect of organoclay in natural rubber (NR)/carbon black (CB)/organoclay compounds. Tensile strength, 100％ modulus and elongation at break point of styrene butadiene rubber (SBR) nanocomposite containing 20 phr CB and 10 phr orgnaoclay are shown higher values than those of SBR/CB compound 3.

关键词： SBR latex Organoclay Na+-montmorillonite Modifier Filler-rubber interaction

作者: Wook-Soo Kim Dongwon Kim Deuk-Joo Park Yun-Hee Kang Wonho Kim

作者单位: Department of Chemical Engineering, Pusan National University Jangjeon-dong, Geumjung-gu, Busan 609- Department of Chemical Engineering,Pusan National University Jangjeon-dong, Geumjung-gu, Busan 609-7 Department of Chemical Engineering, Pusan National University Jangjeon-dong, Geumjung-gu,Busan 609-7

会议类型: 国际会议

会议名称: The 2nd International Conference on Nanomechanics & Nanocomposites(第二届国际纳米力学与纳米复合材料会议)

会议地点: 北京

会议语种:英文

页码: 374-376

在线出版日期: 2010-10-10（万方平台首次上网日期，不代表论文的发表时间）