Research on the Control Method for the Start of Microturbine Generation System

摘要：

The sensorless control method for the high speed permanent magnet synchronous machine without position and speed sensor in the start process of a 30kW microturbine generation system is investigated in this paper. The open-loop speed control mode based on current control is applied at low speed, and the closed-loop sensorless vector control mode is used at medium and high speed. The rotor position and speed estimation algorithm is implemented using an open-loop observer based on back-EMF in the vector control. On the basis of detailed description of the proposed start-up strategy, the simulation and experimental system has been built. Several critical issues were analyzed, including the setting method of the reference speed profile in open-loop mode and the transition time selection from open-loop mode to closed vector control. The simulation and experimental results demonstrate the proposed sensorless control method can meet the requirements of the start process for microtubine generation system, and possesses high static and dynamic performance at large-scale speed.

关键词： microturbine generation system high speed permanent magnet machine sensorless vector control

作者: Yanming Li Hong Guo Qingming Xie Peng Yuan

作者单位: School of Automation Science and Electrical Engineering Beijing University of Aeronautics and Astron Beijing Power Machinery Institute Fengtai District,Beijing 100074,China

会议类型: 国际会议

会议名称: 2010 IEEE信息与自动化国际会议(ICIA 2010)

会议地点: 哈尔滨

会议语种:英文

页码: 1-6

在线出版日期: 2010-06-20（万方平台首次上网日期，不代表论文的发表时间）