A Wideband Beamformer Extended to MIMO Radar
MIMO radar algorithms are the latest generation of techniques which can be applied to phased array radars. They offer the potential to improve the resolution, number of targets that can be identified, and flexibility in beampattern design. To date, most of the work on MIMO radar has been performed assuming the signals are narrowband. However, wideband signals can also improve radar resolution, among other benefits, and are sometimes unavoidable when stringent range resolution specifica tions must be met. This paper presents a method for extending the MIMO narrowband model to a wideband model. This is necessary to obtain improved results from parameter estimation when the transmitted signals are wideband. The results show that the method greatly improves the results compared to those obtained when no techniques are implemented to compensate for a wideband signal. However, best performance is still obtained with a narrowband signal, and therefore the technique presented might only be of interest when a wideband signal is required.
MIMO radar wideband beamforming parameter identification probing signal design
Saran Middleton Anton van Wyk Pascale Jardin Florence Nadal Jacques Cilliers
University of the Witwatersrand, Johannesburg, South Africa Université Paris-Est, ESYCOM, ESIEE Pads, France CSIR DPSS,Pretoria, South Africa
国际会议
长沙
英文
381-385
2010-03-13（万方平台首次上网日期，不代表论文的发表时间）