Study on the Kinematics of the Lips of the Twist Drill on the Axial vibration Part 2: Theoretical Chip Length and Dynamic Angles of the Drill
In vibratory drilling, the chip lengths and working angles alter respectively, and play important part in the process for the quality, efficiency, and chip breakage. The length of the edge movement in real drilling is just the theoretical length of the chip as the distance between the adjacent entering point and detaching point. It is revealed that from the condition of h~=O, the chip breaks automatically in the disjunction vibratory drilling pattern. Change of the dynamic angles was researched and based on the finding that the dynamic angle change undulates cyclically versus vibratory phase angle as well as the axial velocity in magnitude and direction of the drill, generated from the input of vibratory signals, the best performance of the drill in work may be pursued with the optimal working angle and clearance angle obtained by selecting the input vibratory parameters and selecting other drilling parameters in proper order.
Kinematics twist drill axial vibration chip breakage
L.Z.Gu Q.Hong C.J.Xiang
College of Mechanical Engineering and Automation,Huaqiao University,Fujian,362021,China
国际会议
常州
英文
320-324
2009-11-19（万方平台首次上网日期，不代表论文的发表时间）