Numerical Simulation and Experimental Investigation of steam separators
Based on computational fluid dynamics method of two-phase flow,Separation efficiency of steam separator used for steam-water separating in power plant is presented.A mathematical model is established for simulating the flow field of gas flow channels in steam separator.The trajectory of droplets is obtained by using particle motion equation.The gas-water separating efficiency is calculated for the droplets at different particle diameter.The equations are solved by using computational fluid dynamics method.An experimental model is established for determining the structure parameters and critical velocity of steam separator.The results show that structure parameters and inlet gas velocity have great influence on the separation efficiency of wave type plate separator.The separation efficiency of steam separator with hooks is higher than that without it.Plate spacing and length offer the largest opportunity to the performance improvement. The droplets removal efficiency increases with the plate spacing reduction.The turning angle must be less than 54°for a high efficiency and low pressure loss.The gas velocity within the separator should be kept below a critical velocity as well in order to avoid re-entrainment. Numerical and experimctntal results can be directly used for the design of steam separator.
steam separator separation efficiency two-phase flow numerical simulation wave type plate
XIAO Li-chun DING Zhi-jiang LI Qiang YANG Jing-fei SHEN Ya-qin
College of Mechanical Engineering Yanshan University Qinhuangdao, China
国际会议
长沙
英文
1084-1087
2009-10-10（万方平台首次上网日期，不代表论文的发表时间）