Characterization of creep properties of Zeolite molecular sieves using nanoindentation test
The creep behavior of Zeolite molecular sieves has been investigated in this research by using a nanoindentation test. In the holding time, creep curves were obtained. The results show that the penetration depth during constant load phase is time-dependent. After analysis, creep stress exponents of Zeolite molecular sieves were determined from In ε vs .InH curves. Given a secondary creep material model, the indention processes of Zeolite molecular sieves were simulated with the ANSYS finite element code by force loading.The simulative results were consistent with experimental creep curves through modulating the constant C of creep constitutive equation. Therefore, the creep constitutive equations of Zeolite molecular sieves were determined.
nanoindentation Zeolite molecular sieves stress exponent secondary creep
Tong Chen Yong Ma Xiaoyan Niu Xuefeng Shu Jianwen Zhang
Institute of Applied Mechanics Taiyuan University of Technology Taiyuan, Shanxi 030024, P.R.China
国际会议
张家界
英文
34-37
2009-04-11(万方平台首次上网日期,不代表论文的发表时间)