Dynamic Analysis and Technique Study on Stainless Steel Electrolytic Polishing Used for Flezible Display
(0) The dynamics of electrolytic polishing was analyzed. Based on the conclusions, the factors including current density, polishing time, and the electrode space that affect polishing effect were chosen. The mechanical polishing and electrolytic polishing were combined to deal with the stainless steel substrate, and the optimal polishing parameters were obtained through orthogonal tests. Based on the tests, effects different parameters made on polishing results were studied, and the average roughness (Ra) of stainless steel was measured by AFM. The Ra of SUS304 steel was reduced from 20nm to 2.35nm after polishing.
flezible display stainless steel electrolytic polishing average roughness (Ra)
Jian Leng Wei Xue Zhinong Yu Dongpu Zhang Yuqiong Li
School of Optoelectronics, Beijing Institute of Technology,Beijing 100081, P.R.China
国际会议
The 31st International Congress on Imaging Science(第31届国际影像科学大会 ICIS2010)
北京
英文
516-519
2010-05-12（万方平台首次上网日期，不代表论文的发表时间）