Development of Five-azis Micro-EDM Machine Tool
A five-axis micro-EDM machine tool is developed. Mechanical and electrical structures and CNC software are introduced. Based on process rules obtained by a serial of process experiments about electrical parameters, working fluid species and electrode material & machining efficiency and relative wear of electrode, machining experiments are carried out. Small hole with 0.6 mm diameter in TC4 alloy is implemented. Tangent hole with 0.95 mm diameter in stainless steel is finished. Micro-thin shafts for micro planetary gear reducer are obtained and the diameter of each micro-thin shaft is 0.2 mm. Machining feasibility for multi-type parts is verified.
Five-azis micro-EDM machine Small hole TC4 alloy
Guanxin Chi Zhenlong Wang Haipeng Huang Maosheng Li
School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China Key Laboratory of Micro-systems and Micro-structures Manufacturing (Harbin Institute of Technology),
国际会议
The 16th International Symposium on Electromachining(第16届国际电加工会议)
上海
英文
617-621
2010-04-19（万方平台首次上网日期，不代表论文的发表时间）