Study on on-Line Measurement and Controlling System of the Foundation Trench-Leveling Machine
Research the system software and hardware composing, the control mode, the online measurement and control principle based on the laser receiver and the inclination sensor as the signal source. After the laser receiver accepts the laser signal, the laser signal is carried through the light filter treatment so as to reduce the sunlight interference, and then amplified and modulated, last transmitted to the control unit. The inclination sensor adapts XWQJ0201S, measure the slope angle the x and y verticality direction. The error adjusting range is ±0.05°. The separate time treatment avoids simultaneously adjusting the laser and inclination signal to each other interfere. The on-line measurement and control system realizes the parts to work on the plane that parallels with the datum plane of the laser beam scan. The trench-leveling machine must retain ±0.05° with the datuM plane. Adapting the least square method to fit the linear curve, the movement trend of the work parts on the work plane is judged through the slope number. The test result shows that thought the combination measurement and control of the laser and slope angle the leveling precision are ±5mm/100.Its can satisfy with the construction criterion request.
J G Yi H Y Jiang Y Z Xing J Chen J T Liu
Mechanical and electronic Engineering College, Hebei Agricultural University,Boding City, Hebei Province, China
国际会议
第四届仪器科学与技术国际会议( 4th International Symposium on Instrumentation and Science and Tcchnology)
哈尔滨
英文
1273-1278
2006-08-08（万方平台首次上网日期，不代表论文的发表时间）