会议专题

Treatment of carbon fiber brush anodes for improving power generation in air-cathode microbial fuel cells

Three different treatment methods were examined for enhancing power generation of carbon fiber brushes. The combined heat and acid treatment (CF-AH) improved power production to 1370 mW/m~2,which was 34% larger than the untreated control (CF-C,1020 mW/m~2). This power density was 25% higher than using only acid treatment (1100 mW/m~2) and 7% higher than that using only heat treatment (1280 mW/m~2).XPS analysis of the treated and untreated anode materials indicated that power increases were related to the change of surface element content.

Microbial fuel cells Carbon brush Power density Pretreatment

Yujie Feng Qiao Yang Xin Wang

State Key Laboratory of Urban Water Resource and Environment,No 73 Huanghe Road,Nangang District,Harbin 150090,China

国际会议

第二届中国微生物燃料电池研讨会(The 2nd Symposium on Microbial Fuel Cell in China)

北京

英文

1-2

2009-11-13(万方平台首次上网日期,不代表论文的发表时间)