Study on Optimization of Sintering With MAC Ore Fines
This paper introduces MAC fines properties and sinter blend optimization laboratory tests conducted at Masteel. When MAC fines were substituted for Brazilian fines, good sintering results were obtained with a moderate increase in sinter mix moisture to optimise granulation and permeability for the more porous MAC ore. Optimization tests found that return fines and feed %coke level could be maintained constant. Sinter TI was maintained, RI increased notably, productivity decreased slightly and fuel rate increased a little due to lower sinter yield. For the 30%MAC blend, some effective ways were studied to improve performance and achieve target sinter quality. These included increasing sinter basicity to 2.20, increasing burnt lime to 3.0% and using serpentine as a SiO2 and MgO source to replace local high SiO2 ores and dolomite which requires more energy to calcine.
MAC fine sintering ore blending sintering parameter
WU Yi JIN Jun
Maanshan Iron and Steel Co., Ltd. Technology Center, Ma′anshan 243000, Anhui, China
国际会议
The 5th International Congress on the Science and Technology of Ironmaking(第五届国际炼铁科技大会 ICSTI09)
上海
英文
137-141
2009-10-20（万方平台首次上网日期，不代表论文的发表时间）