Heat Transfer Study of Blast Furnace 2 at SSAB Ozel(o)sund
This paper presents a heat transfer study, based on the actual conditions of the hearth of Blast Furnace 2 at SSAB Oxelosund in Sweden. Initially, an experimental study was carried out. The temperature of the cold surfaces of the bottom and wall lining were measured with a hand-held thermocouple. The aim of the overall study was to find a method to determine the outer surface temperature, based on lining temperature readings from permanently installed thermocouples. A heat transfer model was developed, using the established correlations from the experimental study as boundary conditions. With the model, it is possible to calculate a complete two-dimensional temperature profile of the hearth lining at any given time. The permanently installed thermocouples are used to validate the model, by comparing calculated and measured temperatures; the accuracy of the model is plus/minus 3 degrees difference.
blast furnace hearth heat transfer temperature measurements mathematical model
Swartling Maria Sundelin Bo Tilliander Anders J(o)nsson P(a)r
Royal Institute of Technology, Materials Science and Engineering, Brinellvagen 23, 100 44 Stockholm, SSAB Oxel(o)sund AB, 61380 Oxel(o)sund, Sweden
国际会议
The 5th International Congress on the Science and Technology of Ironmaking(第五届国际炼铁科技大会 ICSTI09)
上海
英文
1135-1140
2009-10-20（万方平台首次上网日期，不代表论文的发表时间）