Dynamic design theory and application of large vibrating screen
The reliability is a key factor for the design and manufacture of large vibrating screen. In the paper, we presented a new large vibrating screen with hyperstatic net-beam structure. Dynamic characteristic of the vibrating screen was researched and dynamic simulation method of large screening machines was explored. We used finite element method (FEM) to analyze dynamic characteristic of large vibrating screen with hyperstatic net-beam structure. Multi natural frequency, natural modes of vibration and dynamic response of the vibrating screen were calculated. The structural size of stiffeners on the side plate was optimized under multiple frequencies constraints and an adaptive optimization criterion was given. The results show that the vibrating screens structural strength is increased and the natural frequency of bending deformation is enhanced. The modal frequencies are far from working frequency, and thus the structure is able to avoid resonance effectively and reduce the destructiveness. The maximum transverse displacement of the vibrating screen is 0.13 mm, the maximum difference in vibration amplitude of corresponding points is 0.44mm and the maximum dynamic stress is 16.63MPa. The structural optimization shows that the mass of the side plate is decreased by 194.50kg, the second and third modal frequency is increased by 1.73% and 2.91% respectively and a better optimal effect is received.
large vibrating screen reliability hyperstatic net-beam structure finite element dynamic optimization
Zhao Yue-min Liu Chu-sheng He Xiao-mei Zhang Cheng-yong Wang Yi-bin Ren Zi-ting
School of Chemical Engineering and Technology, China University of Mining & Technology, Xuzhou 22111 Yangquan Coal Group Co. Ltd, Yangquan 045000, China Huayue Machine Co. Ltd, Yangquan 045008, China
国际会议
The 6th International Conference on Mining Science & Technology ICMST 2009(第六届国际矿业科学技术大会)
徐州
英文
1-9
2009-10-18（万方平台首次上网日期，不代表论文的发表时间）