Flowmeter for large-scale pipes
This paper studied a new type of flowmeter, the bypass flowmeter. It is suitable for large-scale pipes. The principle of bypass flowmeter is studied by analyzing flowing in parallel pipes and carrying out experiments at a modified performance test system for centrifugal pumps. The study results showed that the flowrate ratio between the main pipe and the bypass pipe is determined by the geometric structures of pipes and the flowing states in the pipes. The flowrate ratio varies greatly when the Reynolds numbers are relatively lower both in the main pipe and the bypass pipe. The flowrate ratio keeps constant when the Reynolds number in the main pipe is larger than 120000. The head loss becomes smaller when the bypass pipe is connected to the main pipe. The percentage of head loss decrease is from 7.64% to 9.34%. The results indicate that bypass flowmeter is suitable for flowrate measuring in large scale pipes. It will not cause additional head loss to the flow.
bypass flowrate flowmeter large scale pipe
Guo Chu-wen Wu Nan-nan Xia Shuang
School of Mechatronic Engineering and Technology, China University of Mining & Technology, Xuzhou 221116, China
国际会议
The 6th International Conference on Mining Science & Technology ICMST 2009(第六届国际矿业科学技术大会)
徐州
英文
1-5
2009-10-18（万方平台首次上网日期，不代表论文的发表时间）