Influence of Sintering Temperature on Phase Structure and Electrical Properties of Mg-doped (Li, Na, K)NbO3 Lead-Free Piezoelectric Ceramics
Mg-doped (Li, Na, K)NbO3 lead-free piezoelectric ceramics with a nominal composition of Li0.06(Na0.5K0.5)0.94(Nb0.198Mg0.005)O3 (LNKNM) was prepared by normal sintering method. The microstructure and electrical properties were studied with a special emphasis on the influence of sintering temperature in the range of 920-1020 C. A MPB bridging tetragonal and orthorhombic symmetry was found as the sintering temperature was raised from 980 to 1000 C, whereby enhanced electrical properties were obtained. The highest d33, kp, TC, and Pr were 238 pC/N, 41.5%, 470 C, and 38.2 レC/cm2, respectively.
Hai-Tao Li Bo-Ping Zhang Qian Zhang Gao-Lei Zhao Min Cui
School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100 School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100
国际会议
西安
英文
159-163
2009-08-23(万方平台首次上网日期,不代表论文的发表时间)