The Influences of Substrate and Annealing Temperatures on the Characteristics of SrBi4Ti4O15 Thin Films
The radio frequency (RF) sputtering is used as the method and the layer structured bismuth compound of SrBi4Ti4O15+4 wt% Bi2O3 ferroelectric ceramic is used as the target to deposit SrBi4Ti4O15 thin films. The excess Bi2O3 content is used to compensate the vaporization of Bi2O3 during the depositing process. SrBi4Ti4O15 (SBT) ferroelectric thin films are deposited on Pt/Ti/SiO2/Si under optimal RF magnetron sputtering parameters with different substrate temperatures for 2 h, after that the SBT thin films are post-heated using rapid temperature annealing (RTA) method. The dielectric and electrical characteristics of SBT thin films are measured using metal-ferroelectric-metal (MFM) structure. From the physical and electrical measurements of X-ray diffraction patterns, scanning electronic microscope (SEM), I-V curves and C-V curves, the substrate temperatures and RTA-treated temperatures have large influences on the morphologies, the crystal structures, the leakage current densities and the dielectric constants of SBT thin films.
Fang-Hsing Wang Chia-Cheng Huang Chien-Chen Diao Cheng-Fu Yang
Department of Electrical Engineering,National Chung Hsing University,250,Kuo Kuang Rd.,Taichung 402, Department of Electronic Engineering,Kao Yuan University,Kaohsiung,1821,Jhongshan Rd.,Lujhu Township Department of Chemical and Materials Engineering,National University of Kaohsiung,700,Kaohsiung Univ
国际会议
西安
英文
217-220
2009-08-23（万方平台首次上网日期，不代表论文的发表时间）