AN EXPERIMENTAL STUDY ON THE PREPARATION CRAFT OF ACTIVATED RUBBER POWDER MODIFIED BITUMEN
The orthogonal test design principle and variance analysis method were used to study a preparation craft of activated rubber powder modified bitumen. The optimal technological parameters were obtained. These parameters were 15% for the dosage of rubber powder, 600w for the microwave radiation power, 2.5 min for the radiation time, and around lh for the stirring time. The performances of activated rubber powder modified bitumen prepared using the proposed preparation craft were tested. The results show the proposed preparation craft can gain high-quality modified bitumen that has a high-temperature stability and low temperature cracking resistance, which are a good guide for preparation of activated rubber powder modified bitumen.
activated rubber powder modified bitumen preparation craft high-temperature stability low temperature cracking resistance
Ji-Ming Yin Peng Xiao Fan-Ren Lv Xiao-Fang Tong
Department of Civil Engineering, Yangzhou Polytechnic College, Yangzhou 225009, P.R.China Institute of Architecture Science and Engineering, Yangzhou University, Yangzhou 225009, P.R. China Department of Civil Engineering, Yangzhou Polytechnic College, Yangzhou 225009, P.R. China
国际会议
广州
英文
310-315
2009-11-28(万方平台首次上网日期,不代表论文的发表时间)