Biological phosphorus removal with granular sludge in SBR
The formation and performance of granular sludge seeded with flocculating sludge was studied in a 4L sequencing batch reactor (SBR) treating a synthetic wastewater with sodium acetate as carbon source. By gradually reducing the settle time from 30 to 10 min, granule sludge was formed on day 20.The granules had a specific gravity of 1.0439, diameters of 0.5-2mm, and sludge volume index (SVI) of less than 50mL/g. Phosphorus removal granular sludge had good phosphorus removal characteristics. The efficiency of phosphorus removal was over 90%. The max. specific phosphorus release rate (SRPR) and the max. specific phosphorus uptake rate (SUPR) was 62.65 mg/(gVSS·h) and 51.76 mg/(gVSS·h), respectively. And the sludge phosphorus content (TP/SS) was 6.5%.
granular sludge SBR settle time biological phosphorus removal
Xiaoying Liu Chao GUO Dangcong Peng
School of Civil Engineering & Architecture,Wuhan University of Technology,Wuhan 430073,China School of Environmental & Municipal Engineering,Xian University of Architecture & Technology,Xian
国际会议
北京
英文
1-4
2009-06-11(万方平台首次上网日期,不代表论文的发表时间)