Damping vibration Studies of scanning near-field optical microscope
Scanning near-field optical microscopy (SNOM) is one of the major proximal probe technologies for obtaining high-resolution images beyond the diffraction limit of light and to fabricate nanometer-scale structures. The effect of interactive damping on the flexural vibration frequency for the scanning near-field optical microscope (SNOM) fiber probe based on the Timoshenko beam (including the effects of shear deformation and rotary inertia) theory, has been analyzed. The effects of the transverse contact stiffness, damping factor and the ratio of different probe dimensions on the damping vibration frequency were studied. The results show that increasing the ratio of probe length to radius increases the damping vibration frequency of mode 1.The damping vibration frequencies, based on the Bernoulli-Euler beam theory and the Timoshenko beam theory, are compared. When the contact stiffness is very large for the higher modes, the effects of shear deformation and rotary inertia on the frequency becomes significant. Furthermore, increasing the damping factor increases the vibration frequency, especially for dimensionless damping factor ηf>0.4.
Flezural Damping vibration Scaning near-field optical microscope Timoshenko beam theory
Terry Yuan-Fang Chen Haw-Long Lee
Department of Mechanical Engineering, National Cheng Kung UniversityTainan, Taiwan 70101 Department of Mechanical Engineering, National Cheng Kung University Tainan, Taiwan 70101
国际会议
第五届仪器科学与技术国际学术会议(ISIST 2008)Fifth International Symposium on Instrmentation Science and Technology
沈阳
英文
1-7
2008-09-15（万方平台首次上网日期，不代表论文的发表时间）