Interferometry at the PTB Nanometer Comparator-Design, Status and Development
To minimize the measurement uncertainty of one dimensional length measurements on line scales, linear encoders and interferometers the PTB in cooperation with the Dr. Johannes Heidenhain GmbH had built up a new length comparator. The Nanometer Comparator 1,2 has already proven its performance during the measurements of incremental encoders and line scales with an expanded measurement uncertainty of below 5 nm 3,4,5. Due to the introduction of double and multiple exposure in advanced lithography techniques the overlay and registration metrology requirements will drastically increase so that reference metrology tools need to be developed further to be able to follow the resulting decrease of the specifications. Therefore, the PTB further develops the new 1D vacuum comparator to add a measurement possibility for straightness and to reach a measurement accuracy in the sub nanometer range 6. One key development will be the interferometric measurement of all six degrees of freedom of the measurement slide of the comparator. A new multi axis heterodyne interferometer electronics and optical interferometer designs minimizing nonlinearities by spatially separated beams are under development.
Interferometer Length Encoder Registration vacuum interferometry length metrology
J. Flügge Ch. Weichert H. Hu R. K(o)ning H. Bosse A. Wiegmann M. Schulz C. Elster
Geckeler, Physikalisch-Technische Bundesanstalt (PTB) Braunschweig, Bundesallee 100, 38116Braunschwe Geckeler, Physikalisch-Technische Bundesanstalt (PTB) Braunschweig, Bundesallee 100, 38116 Braunschw
国际会议
第五届仪器科学与技术国际学术会议(ISIST 2008)Fifth International Symposium on Instrmentation Science and Technology
沈阳
英文
1-8
2008-09-15（万方平台首次上网日期，不代表论文的发表时间）