Ezperimental Study on the Removal of Arsenic in Waste Water from Semiconductor Manufacturing
An effective and economic process for removing arsenic in waste water which is acuminating in the process of etching, cutting and washing in semiconductor industry has been developed in this paper. The proposed technique of arsenic removal is in three steps: first pretreatment step is to oxidize arsenite to arsenate by potassium permanganate, second key step is precipitation based on arsenic compound solubility with ferric sulfate and slaked lime under pH adjustment, and the last complementary step is followed by the adsorption of the bentonite with enhanced by activated carbon and organic adsorbent. Experimental results show that under the best condition the removal efficiency of arsenic in the waste water is better than 99.99％, or the concentration of arsenic is from its original 100 mg/l reduced to less than 10μg/l accordingly.
arsenic precipitation adsorption waste water semiconductor manufacturing
YU Chun-Yan LI Yue Xiao-Yan JU Shao-Bin
College of Marine Life Science Ocean University of China Qingdao, China College of Chemical and Envi College of Chemical and Environmental Engineering Qingdao University Qingdao, China
国际会议
上海
英文
2973-2975
2008-05-16（万方平台首次上网日期，不代表论文的发表时间）