Clover Polarimetric Detector —A Novel Design of an Ortho-mode Transducer at 150 and 225 GHz
This paper presents the design of an ortho-mode transducer (OMT) to separate two orthogonal linearly polarized signals traveling in a circular waveguide with frequency channels at 150/255 GHz band. Simulations (in HFSS) are presented to determine the optimal probe geometry and feed impedance to achieve good coupling to the optimized probes over a wide bandwidth with corresponding feed impedances for telescopes operating at 150 and 225 GHz. The results show that at 150 GHz band, the return loss can reach below -20 dB from 126 GHz to 180 GHz with the cross polarization reach below -40 dB. At 225 GHz band, the return loss can reach below -20 dB from 190 GHz to 260 GHz with the polarization isolation more than 32 dB.
Philip Mauskopf Peter Ade Stafford Withington Jin Zhang Paul Grime
Astronomy Instrumentation Group,Cardiff University,UK Cavendish Laboratory,University of Cambridge,UK Experimental Radio Cosmology Group,Oxford University,UK
国际会议
Progress in Electromagnetics Research Symposium 2008(2008年电磁学研究新进展学术研讨会)(PIERS 2008)
杭州
英文
1-4
2008-03-24(万方平台首次上网日期,不代表论文的发表时间)