FORCE FEED EFFECTS ON PROCESS STABILITY IN TURNING

摘要：

This paper presents analytical stability analysis of turning using non-linear force-feed model in two dimensions. Most of the existing analytical models ignored the effect of static feed term on the regeneration phenomenon. In practice there is a marked effect of feed on stability due to force variation. The modified analytical equations for cutting insert using three dimensional too geometry are obtained by considering relative motion of tool with respect to a two dimensional elastic models of work-piece. The critical stability limits obtained as a function of feed are confirmed with time domain analysis. Experiments are conducted on a flexible work-piece at varying feed conditions. The measured cutting forces show a marked effect of feed on stability. A neural network models developed to obtain the critical depth of cut at various values of operating speeds and feeds.

关键词： dynamics modeling tool geometry force–feed stability

作者: K.Rama Kotaiah J.srinivas

作者单位: Dept.Of Industrial and production Engineering, K.L.College of Engineering, Vaddeswaram, Guntur(Dist) Dept.Of Mechanical Engineering, Chaitanya College of Engineering, Kommadi, Visakhapatnam, Andhra Pra

会议类型: 国际会议

会议名称: The Fifth International Conference on VETOMAC-V(第五届振动工程及机械技术国际会议)

会议地点: 武汉

会议语种:英文

页码: 265-271

在线出版日期: 2009-08-27（万方平台首次上网日期，不代表论文的发表时间）