APPLICATION OF ELECTROMAGNETIC RADIATION TECHNOLOGY IN ROCK BURST PREDICTION IN COAL MINES
This paper is a review of research on the rock burst prediction by the electromagnetic radiation (EMR) technology and equipment. It is universally acknowledged that LMR signals arc accompanying all stages of the deformation and fracture of rock or coal samples, so we can monitor the change of EMR signals to predict rock burst which is the result of the deformation and fracture of rocks or coals Based on the EMR experiments of coal or rock, the effect and the generation mechanism of EMR signals are analyzed, the LMR monitors of KBD5 and KBD7 types are invented and applied in the rock burst prediction of coal mines in China. Similar to earthquake, there are obvious EMR precursors before rock burst in coal mines and EMR value increases suddenly or gradually, or with rapid EMR fluctuations. Besides, EMR can evaluate the effects of rock burst control measures as the destressing blasting and water injection. After these rock burst control measures, the LMR intensity value in the monitoring area decreases. In addition, EMR technology can be used to monitor the roof movement and forecast the periodic roof pressure on the working face which possibly causes rock burst. EMR technology is widely applied in some coal mines which have rock burst problems.
EN-YUAN WANG XIAO-FEI LIU XUE-QIU HE LI LING
School of Safety Engineering, China University of Mining and Technology Xuzhou, 221008, Jiangsu, P.R.China State Key Laboratory of Coal Resources and Mine Safety Xuzhou, 221008, Jiangsu, P.R.China
国际会议
The 7th International Symposium on Rockburst and Seismicity in Mines(2009年第七届国际岩爆与微振动性学术研讨会)
大连
英文
945-950
2009-08-21（万方平台首次上网日期，不代表论文的发表时间）