A Facile Superhydrophobic Surface for Mitigating Ice Accretion
Ice and snow accretion on power lines is a severe problem for power network and it can cause insulator flashover, wire breakage and tower falling down. Superhydrophobic surfaces have a water contact angle larger than 150°. These surfaces are water repellent and water drops can not stay on the surface stably, which can mitigate ice accretion on the surface. A superhydrophobic aluminum surface with micronanoscale hierarchical structures was constructed by a facile chemical-etching method in the paper. The water contact angle always retained higher than 150° on the hydrophobic aluminum surface and slightly changed even though the climatic temperature varied from -10℃ to 17.5℃. Only local area was covered by ice when the superhydrophobic aluminum surface was sprayed for 5min at -6℃. The ice layer would increased along the partial icing point and no new area was covered even though it was sprayed for 20min. The superhydrophobic aluminum conductor had the same anti-icing result. All show the resultant superhydrophobic aluminum surface can mitigate ice accretion.
superhydrophobic surface contact angle icing temperature aluminum surface
Fochi Wang Chengrong Li Yuzhen Lv Yuefan Du
Beijing Key Laboratory of High Voltage & EMC, North China Electric Power University, Beijing, 102206, China
国际会议
哈尔滨
英文
150-153
2009-07-19（万方平台首次上网日期，不代表论文的发表时间）