Taguchi Method Based Ezperiments of Titanium TC11 Flank Milling Parameters

摘要：

Taguchi design methodology is applied to experiments of flank mill machining parameters of titanium alloy TC11 (Ti6.5A13.5Mo2Zr0.35Si) in conventional and high speed regimes. This study includes three factors, cutting speed, feed rate and depth of cut, about two types of tools. Experimental runs are conducted using an orthogonal array of L9(33), with measurement of cutting force, cutting temperature and surface roughness. The analysis of result shows that the factors combination for good surface roughness, low cutting temperature and low resultant cutting force are high cutting speed, low feed rate and low depth of cut.

关键词： Flank milling TC11 Titanium alloy Taguchi method Machining parameters

作者: Changyi LIU Chenglong Chu Wenhui Zhou Junjie Yi

作者单位: College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics & Astronautics, College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics &Astronautics, N

会议类型: 国际会议

会议名称: 第九届加工技术进展国际会议(9th International Conference on Progress of Machining Technology)

会议地点: 昆明

会议语种:英文

页码: 608-611

在线出版日期: 2009-04-25（万方平台首次上网日期，不代表论文的发表时间）