Compressive Strength of Brick Made from Waste Materials
The objective of this research was to make brick from waste materials, such as MSWI fly ash, water sludge and coffee sludge. It was made by mixing raw materials, drying at room temperature for 24 hrs, and at 60℃ ～ 100℃ for 1hrs. The dried bricks sintered to 1100 -1150℃ by 5℃/min and then kept at that temperature for 2hrs. Compressive strength, water absorption were measured to discuss the characteristics of brick prepared. Toxicity characteristic leaching procedure(TCLP) test is also used to evaluate the environmental safety. The optimum condition was obtained at the mixing ratio as followed; 20:19.5:0.5:60 of MSWI fly ash, water sludge, coffee sludge and clay. Considering the value of compressive strength and water adsorption for prepared brick, it can be used as an alternative brick.
MSWI fly ash water sludge coffee sludge clay brick compressive strength
Woo-Keun Lee Tae-Eun Kim Yeong-Seok Yoo
Department of Environmental Engineering, Kangwon National University Advanced Environment Technology Research Division, Korea Institute of Construction Technology
国际会议
10th International Symposium on Eco-Materials Processing and Design(第10届国际生态材料加工与设计研讨会)
西安
英文
639-642
2009-01-13（万方平台首次上网日期，不代表论文的发表时间）