Low Power Design of Column Readout Stage for Large Format IR ROIC

摘要：

A novel column readout architecture for large format snapshot infrared (IR) readout integrated circuit (ROIC) is proposed in this paper. When the readout rate is 4M Hz,by applying stand-by and the technology of output bus pre-settling,the power of the column readout stage has been reduced from 6.4mw to 0.8mw,which reduced more than 85%. In the output bus pre-settling readout structure,ROIC has four output buses totally and drive the output buffer alternately. When one output bus is being read out,the other three are preparing their data. After the column select signal arrives,output bus has no SR process but small signal settling process,which helps to reduce CSAs bandwidth and power.A 384×288 IR ROIC with pixel size of 30×30μm2 has been designed with this architecture which based on CSMC 0.5μm DPTM n-well CMOS process.

关键词： Infrared FPA ROIC low power output bus pre-settling

作者: Dan Liu

作者单位: The First Research Institute of Ministry of Public Security,Beijing,10048,P.R.China

会议类型: 国际会议

会议名称: 9th International Conference on Solid-State and Integrated-Circuit Technology(第9届固态和集成电路国际会议)

会议地点: 北京

会议语种:英文

页码: 1721-1724

在线出版日期: 2008-10-20（万方平台首次上网日期，不代表论文的发表时间）